FLASH Beamlines

FLASH beamlines parameter summary
 
Information on FLASH beamline parameters and available optical/NIR laser systems for pump-probe experiments [More]
FLASH

FLASH experimental halls 'Albert Einstein' and 'Kai Siegbahn'.

Detailed layout of the FLASH1 experimental hall 'Albert Einstein'

The FLASH facility has two undulator lines, FLASH1 and FLASH2, which provide FEL beam to users simultaneously with largely independent  photon beam parameters. In their respective experimental halls, a photon beam transport system delivers the FEL pulses to one of the experimental stations at a time by switching between photon beamlines using a set of plane mirrors. In order to use each FEL beam most efficiently, several experiments are set up at the same time at different endstations.  Usually, one experiment is online for a few days up to one week and then the beam is switched to another station.

The photon beam parameters of the FEL pulses vary due to the stochastic nature of the SASE process. A suit of photon diagnostics are available to determine the pulse parameters on a shot-to-shot basis. More details

FLASH1 provides four experimental stations in the FLASH experimental hall 'Albert Einstein', in building 28c. The direct “non-monochromatized” beam is delivered to the beamlines BL1 and BL3 (Beamline BL2 has been decommissioned).  BL1 offers the permanent end station CAMP. THz beamline can be combined with BL3 and supplies synchronized pulses from the THz to infrared spectral range. The beamlines PG1 and PG2 are equipped with a high-resolution monochromator selecting a narrow spectrum of the FEL pulse. PG1 has a permanent user endstation featuring a XUV Raman spectrometer for time-resolved RIXS experiments.

FLASH2 will offer up to six experimental stations in the FLASH experimental hall 'Kai Siegbahn', in building 28k. Since spring 2016, the beamlines FL24 and FL26 are available for users. At FL26  the permanent end station REMI, a reaction microscope from the MPIK Heidelberg, is set up. The open port of beamline FL21 is used for inhouse testing of new photon diagnostics components. The new pulse-length preserving monochromator beamline FL23 saw first light at the beginning of 2023 and has since been commissioned. A first FLASH in-house user experiment on single-shot ptychography has been successfully conducted and three more user experiments are already scheduled for the first half of 2024.

Optical laser systems, synchronized to the FEL, are routinely provided for pump-probe experiments at all beamlines. 

 

CONTACT BEAMLINES



Treusch
Rolf Treusch
E-Mail: Rolf Treusch
Phone: +49 (0)40 8998 (9)2693
Location: 28k / O2.007
General Contact / FLASH Experiments Coordinator
Erk
Benjamin Erk
E-Mail: Benjamin Erk
Phone: +49 (0)40 8998 (9)6237
Location: 49 / 112
Contact for Beamline BL1 / CAMP
Pan
Rui Pan
E-Mail: Rui Pan
Phone: +49 (0)40 8998 (9)4526
Location: 49 / 115
Contact for Beamline BL3 and THz-Beamline @BL3
Toleikis
Sven Toleikis
E-Mail: Sven Toleikis
Phone: +49 (0)40 8998 (9)3827
Location: 49 / 105
2nd contact for Beamlines BL3 and FL24
Dziarzhytski
Siarhei Dziarzhytski
E-Mail: Siarhei Dziarzhytski
Phone: +49 (0)40 8998 (9)6187
Location: 28k / O2.022
Contact for Beamline PG1 (and PG2)
Brenner
Günter Brenner
E-Mail: Günter Brenner
Phone: +49 (0)40 8998 (9)4527
Location: 28k / O2.022
Contact for Beamline PG2 (and PG1) and for Beamline FL23
Kuhlmann
Marion Kuhlmann
E-Mail: Marion Kuhlmann
Phone: +49 (0)40 8998 (9)5748
Location: 28k / O2.008
Contact for Beamline FL24
Frühling
Ulrike Frühling
E-Mail: Ulrike Frühling
Phone: +49 (0)40 8998 5788
Location: 28k / O2.018
Contact for Beamline FL26